Tire Building Drum
Tire Building Drum is installed on the SPK-23 machine and is intended for assembling the tire breaker bracelet 11. 00R20.
Description
Tire building drum consists of a shaft attached to the faceplate of the forming drum of the SPK-23 machine. The housing with radial grooves is mounted on the cantilever end of the shaft in which radially movable sliders are placed from levers connected to an axially movable sleeve along the shaft. On the sliders, using removable spacers, the sectors forming the surface of the drum are installed.
The axial movement of the sleeve is carried out from three pneumatic cylinders mounted on the shaft. The sleeve is returned to its original position by springs. Air is supplied to the pneumatic cylinders through a hose from the hole in the faceplate of the SPK-23 Assembly machine.
This product can be manufactured according to the technical specifications of the customer, taking into account its predetermined parameters and features.
The axial movement of the sleeve is carried out from three pneumatic cylinders mounted on the shaft. The sleeve is returned to its original position by springs. Air is supplied to the pneumatic cylinders through a hose from the hole in the faceplate of the SPK-23 Assembly machine.
This product can be manufactured according to the technical specifications of the customer, taking into account its predetermined parameters and features.
Photo
Video
Tire building drum consists of a shaft attached to the faceplate of the forming drum of the SPK-23 machine. The housing with radial grooves is mounted on the cantilever end of the shaft in which radially movable sliders are placed from levers connected to an axially movable sleeve along the shaft. On the sliders, using removable spacers, the sectors forming the surface of the drum are installed.
The axial movement of the sleeve is carried out from three pneumatic cylinders mounted on the shaft. The sleeve is returned to its original position by springs. Air is supplied to the pneumatic cylinders through a hose from the hole in the faceplate of the SPK-23 Assembly machine.
This product can be manufactured according to the technical specifications of the customer, taking into account its predetermined parameters and features.
The axial movement of the sleeve is carried out from three pneumatic cylinders mounted on the shaft. The sleeve is returned to its original position by springs. Air is supplied to the pneumatic cylinders through a hose from the hole in the faceplate of the SPK-23 Assembly machine.
This product can be manufactured according to the technical specifications of the customer, taking into account its predetermined parameters and features.
Contacts
Central office and factory:
Tel./Fax: +7 (3812) 36 74 02, 36 74 12, 36 78 54, 48 48 30
e-mail: info@policon-rt.ru
Moscow office:
66 Leningradskiy prospekt, Moscow, 125315, Russia
Tel: +7 (499) 649 60 10, +7 (915) 198 09 21
e-mail: dech@policon-rt.ru
66 Leningradskiy prospekt, Moscow, 125315, Russia
Tel: +7 (499) 649 60 10, +7 (915) 198 09 21
e-mail: dech@policon-rt.ru
Yekaterinburg office:
80 Komsomolskaya Str, Yekaterinburg, 620138, Russia
Tel./Fax: +7 (343) 272 82 78, +7 (982) 630 25 15
e-mail: ural@policon-rt.ru
Contacts
Central office and factory:
Tel./Fax: +7 (3812) 36 74 02, 36 74 12, 36 78 54, 48 48 30
e-mail: info@policon-rt.ru
Moscow office:
66 Leningradskiy prospekt, Moscow, 125315, Russia
Tel: +7 (499) 649 60 10, +7 (915) 198 09 21
e-mail: dech@policon-rt.ru
66 Leningradskiy prospekt, Moscow, 125315, Russia
Tel: +7 (499) 649 60 10, +7 (915) 198 09 21
e-mail: dech@policon-rt.ru
Yekaterinburg office:
80 Komsomolskaya Str, Yekaterinburg, 620138, Russia
Tel./Fax: +7 (343) 272 82 78, +7 (982) 630 25 15
e-mail: ural@policon-rt.ru